×
 x 

0 Products
tam58721-a
tam58721-a_1

Fiat Abarth 1000 TCR Berlina Corse - 1/10th scale 2wd on road car kit (MB-01 chassis)

Part No: TAM58721

In Stock: 1

RRP Price £184.99
DMS price: £149.95
Saving from RRP: £-35.04
Description

RC Fiat Abarth 1000 TCR Berlina Corse (MB-01 Chassis)

The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any level user. Enter, the all-new MB-01!

The new MB-01 chassis continues that tradition and allows six setups by choosing from three types of wheelbases, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600.

The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.

 

Features:

  • The multi-purpose, 2WD MB-01 chassis gives choices of three types of wheelbases.
  • Simply change attachment directions of final gears and steering linkage to switch between front- and rear- wheel drive; low or high motor position can be chosen for rear-wheel drive cars.
  • Unitized sections such as motor mount and final gears facilitate ease of assembly and effective maintenance.
  • The 4-wheel double wishbone suspension features symmetrical structure and friction dampers.
  • While this is a 2WD model, multi-link suspension is compatible with tires featuring the same compound and rear tire with toe-in as 4WD models.
  • Gear ratio: 5.83:1 (when using kit-standard 29T pinion gear)
  • Features 55mm diameter front tires and 60mm diameter rear tires to authentically recreate the stance of the actual car.
  • Coil sprung dampers come as standard.
  • The steering servo is installed in the right-rear of the model, and moves the steering linkage via a link rod.
  • The motor mount is assembled as a unit, and secured to the chassis using two screws.
  • The 4-bevel gear differential is the same as that on the TT-02.
  • The flip-up battery holder gives quick access.
  • Many Hop-Up Option parts for M-chassis and TT-chassis cars can be used to fine-tune setup.
  • Includes 540 motor and ESC.

Specifications:

  • Length: 374mm, width: 168mm, height: 140mm
  • Wheelbase: 210mm (Short)
  • Tread: 140mm (front & rear)
  • Tire width/diameter: 25/55mm (front), 25/59mm (rear)
  • Gear ratio = 5.83:1 (using kit 29T pinion)
  • Adjustable Gear Ratio: Yes
  • Bearings: Plastic bushing
  • Body Material: Polycarbonate
  • Body Stickers: Included
  • Chassis Material: ABS Plastic
  • Chassis Type: MB-01
  • Construction Type: Assembly Kit
  • Differential Type: 4-bevel differential gear
  • Drive Type: RWD
  • Electronic Speed Control (esc): Includes HobbyWing 1060 Brushed Motor ESC (2-3S)
  • Motor: 540-brushed type
  • Scale: 1/10
  • Shock Damper: Friction type
  • Suspension: Fully Independent Double Wishbone
  • Terrain Use: On-Road

 

Required to Complete: 

2-channel radio

7.2-7.4volt battery

Compatible charger

Paint

 

RRP:
£184.99

Our Brands.....

×